to 20 timing

hayhay5757 · Aug 6, 2018

how do you adjust timing no mark on pull ??

Thanks

Bruce(OR) · Aug 6, 2018

The mark is on the flywheel inside a small opening at the back of the engine.
If you stand on your head you can see it to set it.
Now if you desire to cheat a bit, look inside the hole and rotate the engine so the timing marks line up.
I then use a "C" clamp and secure a flat file to the front axle bolster angled towards the front pulley and about a 1/4 inch away.
Paint, (nail polish) a corresponding line on the front pulley so the flat file now becomes your timing set point. Fire it up and set your
timing.
Your done after you remove the flat file.

to 20 timing

hayhay5757

Member

Bruce(OR)

Well-known Member

Similar threads