SickVoodoo
Member
Anyone know where I can purchase a hydraulic pump lever assembly for a 58 to35. The top roller fell out of mine and I can only find it with the pump assembly.[/img]
- Thread starter SickVoodoo
- Start date
SickVoodoo
Member
SickVoodoo
Member
Steve@Advance
Well-known Member
What holds the roller in?
Could it be drilled out and a roll pin put through?
Could it be drilled out and a roll pin put through?
SickVoodoo
Member
I did think about drilling it and using a bolt but I don’t have a lathe to make sure the hole is centered. If needed I can have it turned.
SickVoodoo
Member
I just ordered a spacer, shouldered bolt, and lock nut to replace the damaged roller. I will post pictures and part numbers once everything comes in.
Steve@Advance
Well-known Member
There you go!
That should work. But come to think of it, I don't see any need for it to actually roll. Just a spacer
should work fine.
That should work. But come to think of it, I don't see any need for it to actually roll. Just a spacer
should work fine.
SickVoodoo
Member
I ended up replacing the factory roller with a spacer, shouldered bolt, and lock nut. $12 from mcmaster car and received the parts next day.
spacer p/n 92320A831
shouldered bolt p/n 92012A506
lock nut p/n 90631A005
spacer p/n 92320A831
shouldered bolt p/n 92012A506
lock nut p/n 90631A005
SickVoodoo
Member
repost the first pictures now that I know how.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy