TEA20 Stay Bars

kaesark

Member
Hi Folks
I am wanting to get the sway bars for my TEA 20 and these are being offered as off a tea24.
Im not sure they are as they have a right angle at the end, is that correct do you think?????
Any help advice appreciated.
<image src="http://forums.yesterdaystractors.com/photos/mvphoto2091.jpg"/>
a169215.jpg
 

The bars shown are not sway bars but rather adjustable stay bars .
To clarify ,[u:c2148a6bf6] Sway bars [/u:c2148a6bf6] go from brackets under the back axle to the ends of the lift arms and mount onto the end of the implement bar .[u:c2148a6bf6] Stay bars [/u:c2148a6bf6] are adjustable lift stays and are used to lock the lift arms into a set position when carrying heavy implements or for example a carryall that is not required to be lifted . When using these stays a light chain and wedge was used to render the quadrant lever inoperative so the bars wouldn't be bent by a unthinking use of the lift .
In any case those stay bars are from a FE 35 not a TE20 , the difference is the length of the ' ears ' on the ends , the 35's are much longer , the 20's really only a very short nub .

2094.jpg
2095.jpg
 
Sorry I did mean stay not sway but it's
now obvious that my pics are of te35 stay
bars and presumably will not fit te20.
Thanks.
 

You can make them fit if you want to , they won't work as sway bars though . Cutting the ' ears ' back so they fit into the smaller TE20 pin bracket is easy enough to do .
 
I suppose they could be fitted to the
outside of the top bracket and using o
longer pin, would work?????
a169434.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top