Michael QLD OZ
Member
I finally got time to make a start on my seized TEf.
Took off the unlet and exhaust manifold. Disconnected the decompresion shaft and removed the rocker/ tappet shaft assembly. One shaft support is broken so that will need replacement or repair.
Pulled off the head and put cylinder liner retainers in place.
However the one on cylinder number 2 from drivers seat slipped off, my fault.
This is the stuck piston and it pushed up 2 rings which appear to be sitting above the liner.
Im waiting for pictures to upload to this machine, as soon as they do I will post them.
Took off the unlet and exhaust manifold. Disconnected the decompresion shaft and removed the rocker/ tappet shaft assembly. One shaft support is broken so that will need replacement or repair.
Pulled off the head and put cylinder liner retainers in place.
However the one on cylinder number 2 from drivers seat slipped off, my fault.
This is the stuck piston and it pushed up 2 rings which appear to be sitting above the liner.
Im waiting for pictures to upload to this machine, as soon as they do I will post them.