yikes

steve19438 · Feb 26, 2017

well at least I can see it in one piece.
Untitled URL Link

Rick in Iowa · Feb 26, 2017

should be able to make one for that kind of money.when I was in mowing business mowers used those ball joints.take old one to different parts stores or dealers.one time regular source was out and I needed one real bad and got it at john deere construction equipment dealer.i started keeping one of each on hand and with me.been 20 years but they were $4-5 then.not hard to thread piece of rod if that one is rusted tight.

Del Huebner · Feb 26, 2017

Steve, here is a picture of the ends I got from McMaster-Carr. My threaded rod off the TO-30 was still good. Don't remember how much they were but pretty reasonable.

Brendon Warren · Feb 26, 2017

That's why I posted the dorman 41031 carburetor ball joint. You might be able to save your rod from in between. I think I just bought the one for my MH 50 for $7. The one you showed doesn't look too hot.

steve19438 · Feb 26, 2017

the rod I have is ok. cleaned up ok with wire brush and threads are good.

Dieseltech · Feb 26, 2017

I think NAPA and Fastenal have ball joint rod ends too.

yikes

steve19438

Well-known Member

Rick in Iowa

Member

Del Huebner

Member

Brendon Warren

Well-known Member

steve19438

Well-known Member

Dieseltech

Well-known Member

Similar threads