Lower Lift Arms

320Forest

Member
Anyone know if there is a difference in the two different Lower Lift Arms they have for sale in the store here? My TO-30 arms were welded and the eyes are shot again. I need the leveling box, (when I lower mine about halfway the rod is worn and falls out), my LH Leveling Rod is welded, and longer than my lift box will make up for. All that leads to a lot of adjustment on the grader blade to spin my grader blade left to right angle. I figure I may just buy all new parts as I'm working the Fergie a lot.
 


45291.jpg


This works fairly well .
 
Thanks Miner
It was dark when I got home, maybe tomorrow I'll see daylight after work and can measure some things.


(quoted from post at 19:30:06 02/06/17) The arms are 32 1/2 inches center to center of holes. If yours have had ends welded they may not have been repaired to right length.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top