TO 20 Front Axle Support

maxazillion · Dec 23, 2016

Was wondering if anyone knew if this would fit a TO 20. The owner is not sure what model it came off of but it was a Ferguson. Thanks for any replies.

Bruce(OR) · Dec 23, 2016

Ah! Clarity! At Last!! Magnificent to say the least! From my memory, it looks like a TO-20 bolster. Did your '20
run away and you can't catch it for a look-see? I know. It's outa town and your not. You, uh, often let your
tractor vacation with out you? Is this some kind of new fangled "open relationship"? I have heard of floozy
women but I ain't never heard of a floozy tractor... Open to giving rides to anyone, eh?
Must be a shy machine though....Took three tries to get part of it in front of the camera.

Bruce(OR) · Dec 23, 2016

If you don't thinks thet there is funny. . . .

Havin' too much fun.
Untitled URL Link

cdmn · Dec 23, 2016

I have some doubts. I think it might be quite a bit newer. It appears to be
a cast iron unit. I seem to remember them being fabricated from plate steel. This might
be from a 35 or 135.

Delawaresurfman · Dec 23, 2016

I'm not sure but I will say that I just worked on my radiator on my TO30. The picture that you posted has the same slot on the right side looking
at your picture, that my TO30 has. This is the radiator mounting hole. Looking at your picture the left side is a hole and the right side sloted.
This is to allow you to twist the radiator into position with the shroud bolted to the radiator. So my thought is yes it possibly is. The axel support
part number for the TO30 and TO 20 are the same. The pin is not the same. The 20 has a 3 3/4 inch pin or a 4 3/4 with a 5/8 inch bolt hole in
the end. The 30 has a 4 3/4 long pin with a 7/8 inch bolt hole. Hope this helps,

TO 20 Front Axle Support

maxazillion

Member

Bruce(OR)

Well-known Member

Bruce(OR)

Well-known Member

cdmn

Member

Delawaresurfman

Member

Similar threads