To30 upright exhaust bracket

Lamina1982 · Nov 1, 2016

Where do u guys attach the upright exhaust to? Currently is a makeshift bracket of the manifold but its not all that sturdy...thats how it came. Ive tried finding pics to see how others do but not always pics of that area.
Yhanks for help.
Pics wld be nice

Brendon Warren · Nov 1, 2016

I assume my Ferguson 40 is similar. I'll try to get you a pic
tomorrow.

miner09 · Nov 1, 2016

What I've seen the exhaust elbow is all that supports the muffler. It's all the parts
book shows also. Just have to be careful and not hit limbs etc.

Lamina1982 · Nov 1, 2016

Mine doesnt have the 3 bolt triangle thing like ive seen online. Looks like someone chopped and welded it.
Heres a pic

As u can see just a homemade bracket onto manifold and were pipe attaches to manifold its not all that sturdy either.

Brendon Warren · Nov 2, 2016

Totally different from my 40. And the pic won't upload.

wellmax99 · Nov 3, 2016

I am just a country redneck from KY but this is how I would do it if I were you.
note to file: I have a TO35 and I have run a upright muffler on it for years, but I did not like the noise in my face and also I am not a good driver, so I let the muffler hit a tree branch a could of times, guess what the back corner of the manifold broke off,
that was a pain in the bottom, so I when back to a under belly muffler and I am a happy camper.

but if you want here are the parts you need to do it right in my book,

all states AG parts # 110579 manifold adapter
this part allows you to clamp your manifold to the elbow (you need this)

other part you need is the elbow, all states ag parts will have this part too
then you clamp your new upright muffler to the elbow

Lamina1982 · Nov 5, 2016

Thanks for the info

To30 upright exhaust bracket

Lamina1982

Member

Brendon Warren

Well-known Member

miner09

Well-known Member

Lamina1982

Member

Brendon Warren

Well-known Member

wellmax99

Member

Lamina1982

Member

Similar threads