1949 TO20 converted to 12 volts with Ford alternator and voltage regulator long ago. Alternator is new and tested good. Tried two new regulators. It has a new battery. Checked all wires for continuity. All good. Wired as shown. Never had connection to A terminal on voltage regulator. I'm baffled as to why it's not charging anymore. Any suggestions for troubleshooting?
Alt###Reg
BAT-------------Ammeter-------Block---Cutoff Switch---Battery
#####I-----------------------Ignition Switch
#####A (no connection)
STA-----S
FLD-----F
# = space to make things line up under alternator and regulator
Please forgive the above...couldn't get picture to load.
Alt###Reg
BAT-------------Ammeter-------Block---Cutoff Switch---Battery
#####I-----------------------Ignition Switch
#####A (no connection)
STA-----S
FLD-----F
# = space to make things line up under alternator and regulator
Please forgive the above...couldn't get picture to load.