Ha fergie freaks.
welding up a mower deck with my new dc welder.
I tested some lap welds with the 2mm gal and found the 2.5 rods to be the best..... but welding the edges seem to be a differnet case.
I am repairing a mower deck. its about 2 mm thick and have 2 mm gal that i am patching it with. See photos. I have used 1.6 mm rods at varying amps from 20 to 50 amps. When welding patch to deck, i find it a fine line between blowing holes or not get good penetration in to the deck.
Any thoughts welcome before i blow more holes
welding up a mower deck with my new dc welder.
I tested some lap welds with the 2mm gal and found the 2.5 rods to be the best..... but welding the edges seem to be a differnet case.
I am repairing a mower deck. its about 2 mm thick and have 2 mm gal that i am patching it with. See photos. I have used 1.6 mm rods at varying amps from 20 to 50 amps. When welding patch to deck, i find it a fine line between blowing holes or not get good penetration in to the deck.
Any thoughts welcome before i blow more holes