Delawaresurfman
Member
As many may know I purchased my grandfathers
TO30. I ordered the service manual as well as the
parts manual.
I have bought the oil filter and it came with 2
gaskets. 1 is flat and the other is a "o" ring.
The books are not clear at all on the location of the
gaskets. The service manual says pull out cartridge
and that's about it. The parts book diagram shows
the flat gasket going in first at the bottom before you
slide in the filter. Nothing is shown for the "o" ring at
all.
What is the sequence? I'm sure it will be obvious
when I take it apart but figured I'd ask first
Please help, John
TO30. I ordered the service manual as well as the
parts manual.
I have bought the oil filter and it came with 2
gaskets. 1 is flat and the other is a "o" ring.
The books are not clear at all on the location of the
gaskets. The service manual says pull out cartridge
and that's about it. The parts book diagram shows
the flat gasket going in first at the bottom before you
slide in the filter. Nothing is shown for the "o" ring at
all.
What is the sequence? I'm sure it will be obvious
when I take it apart but figured I'd ask first
Please help, John