Jim in rush co ... Gas Tank Springs

Steve@Advance · Jul 27, 2015

Jim, a couple months ago I asked about replacing the gas tank on my TO35, going back original. You said you might have the 2 front springs. Ever get a chance to look for them? I'm finally getting around to fixing it and could give them a good home. The fine thread carriage bolts would be a plus too!

Thanks!
Steve
Email is open.

Jim in rush co · Jul 27, 2015

Steve I have the springs, But only 1 good one and one with 1/2" broken off. I got new ones at MF dealer and they might be able to get the fine carriage bolts also. I can give measurement of the springs and you can most likley find a a good hardware place, most implement dealers also have a good spring assortment. I opened email.

Steve@Advance · Jul 27, 2015

Thanks Jim. I got the measurements off the parts page you sent me. I'll see what I can find, shouldn't be too hard to find them. The fine thread bolts aren't necessary, too many other things are not original already!

Thanks again! Steve

Jim in rush co · Jul 27, 2015

If you want to give me your mailing address, I'd be glad to send the good spring so you can match up another. Jim

Jim in rush co ... Gas Tank Springs

Steve@Advance

Well-known Member

Jim in rush co

Well-known Member

Steve@Advance

Well-known Member

Jim in rush co

Well-known Member

Similar threads