In need of a nut...

Ark68SS

Member
...to hold the charge light bezel in the dash of my TO20. It was nothing but rust when I took it apart, figured it wouldn't be too hard to find. Wrong again. :(
Many thanks for any leads in finding one, part #181 381 M1 or TO3681.
BillL
 

The nut you need is very similar to those used for panel mounted controls for old radios and televisions . A junk yard or hobby electronics shop might be a good place to look .
I think I may have used a nut from an old ignition key switch at some stage for the same purpose.
 
(quoted from post at 07:20:04 05/12/15) Nut available from Agco...About $1.25
Wayne

Problem for me is that the nearest AGCO dealer is 3 hours away, they don't like to deal with guys restoring old tractors, and with shipping and their 100% markup it'll wind up costing me $10.
I'm hoping for a better solution. Gonna run up to NAPA and see what they have.
Thanks,
BillL
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top