Armand

Member
2 days ago I did some brush hogging to get the feel of it. (Brand new at this) Everything was great and worked fine.

Today I decided to check the blades for sharpness. Now there is a continuous banging noise under the deck. All I did was remove the top plate and stuck my arm in the hole and pulled the blades around to feel the edge, Never took the blades off.

Its a 5 foot cutter but dont know the make,,,, no stickers. Could it be possible when I moved the blades by hand I threw off the balance or something else.
 
No, you didn't cause it. Raise it up and support it with jack stands or something you can trust to hold it,
turn it through, look at what's happening. Feel for loose bearings, loose hub, etc. Look the housing over for
something bent, broken, or loose.
 

going to get some help looking under. Dont want to be alone doing that... might ruin my good looks... Thanks again guys
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top