jnam061403
New User
I am in need of a little assistance with some baseline measurements for the throttle linkages on my 1951 Ferguson TO-20. I've had to make new linkages and just want to make sure I am in the ballpark before I start fine tuning.
In the attached picture, I am in need of the following:
1. The length of the governor to carburetor rod/ yoke (parts 16 and 28 combined)
2. The length of the governor lever arm rod and plunger (parts 15 and 29 combined)
In the attached picture, I am in need of the following:
1. The length of the governor to carburetor rod/ yoke (parts 16 and 28 combined)
2. The length of the governor lever arm rod and plunger (parts 15 and 29 combined)