John Deere O ring soap part #?

I'm putting in new sleeves does anyone know the part number for the JD soap-lube that I use on the sleeve o rings? Thanks
 
O ring grease got me to thinking of what I used when
I did her Fergy. It was vaseline petroleum jelly. A
trick I learned while playing with Hydraulic O rings
in the military a few years ago. I recently had to
reseal some tires on a mower and used Dawn
dishwashing soap for that one.
So if you can't get your JD soap, you have other
options.
 
Is this the stuff Jim? http://eshop.williamkerrtractors.com/AR54749-LUBRICANTSOAPQUART-BOTTLEJDT-308 Its in England but it has the part number.
 
Just what the book says. I would think that a water based lubricant would do best and not cause any deterioration of the O rings.
 
(quoted from post at 17:01:14 02/03/15) Ok I'm not sure what to use I was told that Vaseline would mess the o rings up when the tractor got warm?

I use a silicone based grease. NAPA carries it under part #765-1351, called Sil-Glyde. Other parts stores will have it, it's used on brake parts and weatherstripping. Won't melt, won't freeze, won't gum up, water repellant, and works great for sleeve seal applications.
BillL
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top