Decisions,decisions...I have that Dearborn two 12" that I got at the local scrapper to get a coulter assembly off of. I sold the slat moldboards off of it, Tony brought up the idea of making a single bottom out of it,although I would still be stuck with the Dearborn prior model style headstock and cross bar assembly because I can not find any Fergusons being parted out. I'm sitting there looking at an extra beam and then it hits me. I could take my two 14" MF 62 and make a three bottom out of it. The beams are the same dimensionally. I would just have to get a machine shop to make me the diagonal braces as they are no longer available from MF. The. I turn and look at my Ferguson 2 12" I bought a while back and I could make a three bottom 12" Ferguson and then I would already have one diagonal brace. I would just need one more. I'm leaning more towards making a three 14" out of it. Yes Tony...coulters and all...lol. Then just make a single 16" out of the rest of the Dearborn. You can't touch a single 16" around here. The local dealers around here get $400.00 to $500.00 for a good older single bottom.