box blade for TO30

golferjones

New User
Does anyone know what size box blade a TO30 can comfortably handle? I'm thinking a 4' or 5'. I'm just wondering about a 6'- is that too big?
 
A 5' foot blade would be roughly the width of the wheels, and might be a good fit.

I don't think you'd have trouble picking up a 6' blade. But you sure couldn't pull it if it was full.
 
(quoted from post at 05:57:02 06/25/14) Does anyone know what size box blade a TO30 can comfortably handle? I'm thinking a 4' or 5'. I'm just wondering about a 6'- is that too big?

I may be too late with this, but here goes. My 52 TO-30 came with a 5' box blade with no teeth. I sold it and bought a 6'.
It handles the 6' with no problem. I have had it full of packed dirt with concrete chunks, and also nearly full of crushed limestone rock, Never slowed it down a bit. My blade/tractor have no angle adjustments. Havn't seen one that does. If I can find out my overheating cause, I have more work to do. Hope this helps.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top