pressure gauge

jennifer408 · Apr 10, 2014

hi, i am trouble shooting the hydraulics on my MF TO-35. the shop manual says to check the pressure to see if the relief valve is working properly. where can i buy this kind of gauge ?

miner09 · Apr 10, 2014

You should be able to just make it. Buy a gauge and pipe at local hardware store. Try Lowes or Home Depot. They should have the gauge. Two nipples, 1 ell(90), gauge. Use a longer nipple and you may not have to buy the union. Just so it will miss edge seat when you screw it on.

Inno · Apr 10, 2014

Just make sure the gauge you get is for the proper pressure range.

supergrumpy · Apr 10, 2014

got one at h/f, goes up to 3,000 psi

dennisinohio · Apr 10, 2014

I bought a gauge at local NAPA store. My TE 20 is rated at around 2000 PSI, but not sure about your tractor"s PSI. I suggest perhaps 0 to 2500 for yours.

jennifer408 · Apr 10, 2014

thanks for the reply's, i guess I'll try the HF one first and if it fails me I'll go buy a real one. after all they do call it harbor fright for a reason

Anonymous-0 · Apr 11, 2014

I would check auto supply store , TSC , Harbor
Freight if no luck. On-line , Grainger , MSC ,
Northern , McMaser-Carr , Northern Tool .

pressure gauge

jennifer408

Well-known Member

miner09

Well-known Member

Inno

Well-known Member

supergrumpy

Member

dennisinohio

Member

jennifer408

Well-known Member

Anonymous-0

Well-known Member

Similar threads