|Harry Ferguson Tractors Discussion Forum|
Re: TO30 Pivot pin and bushing
[Show Entire Topic]
[Show Entire Topic]
[Return to Forum]
[Log in to Reply]
Jeremy in DE
Quoting Removed, click Modern View to see
That makes complete sense. My confusion arose because the parts page of this site lists two possible pivot pins and bushings for a TO30. For both the bushings and pins they mention one is for "swept back axles", thus implying (to me) that the other is for the "not swept back axles". I take it that conclusion was erroneous. All are swept back, it's just that some of the part descriptions mention it while others do not.
This actually makes more sense now, as I think I understood Jason to say he needed the thin bushing (180344M1) and pin (183221M1), the former of which has no mention of "swept back" and the other of which is described as "for swept back axles".
Once it's daylight I'll follow Jason's suggestion and look for a part number on the front of the pin. Maybe then I'll know what I'm dealing with and can have all the parts on hand to keep downtime to a minimum.
As an aside, I notice the AGCO parts page doesn't mention swept back. I also notice their thin bushing's dimension differ from this site's by 1/64". Is one better? I hear the AGCO pin may be the way to go, although typically I order from this site.
|Fast Shipping! Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]|
| Copyright © 1997-2015 Yesterday's Tractor Co.|
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters