1956 Ferguson TO-35 Hood Parts

pdbrown1956

New User
Looking for source for small pins that hold center section of hood on and springs for the two push button center hood release for a 1956 Ferguson TO-35.

Any help appreciated.
Paul
 
Mine has cotter keys in the straps as well but the one under the big straps that hold the hood down is missing and I was looking on my brother=in-law's TO-35 this past weekend and his had long round pins with a split on the end like a cotter key. I could use a cotter key like the top part I guess but still need the springs to hold the button up.
 
pdbrown, I am doing a research project on the 56 TO 35s. I would like to send you some information to have you fill in the blanks if you don't mind. I will have to send it direct to your email not through the forum. Please contact me my email is open. Thank you. Richard
 
Are your early bonnet hinges and catches like the British built bonnet? If so Iwill have a look around if I find time before I leave on Wednesday morning. I can leave them with some of the ten or so YTmembers that are attending the Expo.... I am sure someone will get them to you.
Sam
a124927.jpg

a124928.jpg
 
Mine is just like your pictures other than the ears sticking out to go under the main hood is broken and the holes for the second cooter key that goes undet the strap is missing. As I said my brother-in-law has an original 1955 TO-35 and it has pins instead of cotter keys. I also still need to find a place to get the button springs.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top