(800) 853-2651
SHOP NOW

OEM Pivot Pin with Aftermarket Thin Bushing?

T

Tom Bowman

Member
I received, then returned, a crude-looking aftermarket pivot pin for my TO-20 (NOT from this website).

I checked into an OEM pivot pin and bushing, mainly because I liked the looks of the OEM pivot pin in the photos Jason S. posted a while back.

The OEM pivot pin is available; BUT the OEM bushing back-order date keeps getting pushed further out.

Will I be OK with the OEM pivot pin, and an after-market thin bushing, like the one sold on this site?
 
It worked fine on my tractor Tom. The aftermarket bushing I got from this site was a split bushing like the original. I used it and the Agco pin. I would recommend using the graphite spray because it took me a while to get used to the squeak. Im fixing to get on my TO-20 here in a few and hitch up the old D-EO-20 rake and rake about 20 acres of hay. If you get bored come on out I have and extra D-EO-20 rake just sitting there....lol
 
Thanks for thinking of me Jason, but I'm afraid your hay will get wet (or snowed on!) if you wait for me and my TO-20 - it's still quite a ways from being back in operating condition.
 
You must log in or register to reply here.

Similar threads

M
pulling the front axle pivot pin in a MF245
Replies
5
Views
353
stevieb49829
stevieb49829
S
Lubing The 885's Front Axle Pivot Pin
Replies
3
Views
157
ScottNC
S
Crazy Horse
Oliver 88 clutch pedal pivot pin problem ....
Replies
8
Views
354
Mike(NEOhio)
M
S
885 Front Axle Pivot Pin and Bushings
Replies
0
Views
340
ScottNC
S
S
DB 885 front axle bushing and pin
Replies
3
Views
597
Traditional Farmer
T
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top