TO20 conversion to 12V from a 6V system.

gaga72 · Jul 30, 2013

We are interested in converting our Ferguson 1949 TO20 to a 12Vsystem.We have looked at the kit from Yesterdays Tractor.We asked a question earlier from them regarding the fit of the bracket.We asked for a drawing or picture to see if it would work before investing in it.We got a lame answer that they sold 100's of them and it would fit.We would like to know if someone has used the kit or would have a picture or drawing of the tractor so we could make sure it fit after making the investment of the funds they want for the kit.Would appreciate if someone could answer my question .Thanks

Dan S (NY) · Jul 30, 2013

I have never bought a kit but the generator mounts differently on a TO20 and a TO30 and I see two different kits listed here in the YT parts store. One specific to a TO20 and one for a TO30 so I would assume they have tailored the kits for each specific tractor. Hopefully someone will come along that has actually bought the TO20 kit and let you know how well it fit.

Dan

Anonymous-0 · Jul 30, 2013

WHY ???? for 50 years they have started on 6v. 12v will not fix poor maintenance

Bruce(OR) · Jul 31, 2013

yeah. I bought a "kit" from fleabay. Not so cheap. I wound up fabbing a lower mount.
The upper mount was also fabbed. Then again, the genny could have been found cheaper also.

gaga72 · Aug 1, 2013

Thanks for all of the replies.They answered the questions we had.Appreciate the feedback.Just by looking of the kit pictures we found no way it would work for us,Thanks again
One place offered a 1/2 inch but I think it is a 5/8. However there is a 3/4" belt.

TO20 conversion to 12V from a 6V system.

gaga72

New User

Dan S (NY)

Well-known Member

Anonymous-0

Well-known Member

Bruce(OR)

Well-known Member

gaga72

New User

Similar threads