Hi all, i want to put the headlights back on my to20 but need the mounting bolt for each, can these be bought online or is there a hardware item that will substitute? btw, there are two different clutches for the to20, is there a year or serial no. break point to tell which one is used or do i have to split the tractor to find out?
- Thread starter GL59
- Start date
Del Huebner
Member
I think this is the bolt you are referring to. Its a special bolt and I think the same as for the "N" Ford lights. Have seen it for sale in some of the parts catalogs.
Del Huebner
Member
The bolts are hollow to allow the wiring to go through them.
Brian Allen
Well-known Member
GL59
If you try to drill one of those bolts, drill it slow and don't let the drill bit heat itself up, or allow the metal to get hot which will make it get hard.
The best bet is do it in a drill press with less than 200 RPM.
If you can find a carbide drill bit, (not a cement drill) it will do the job for you.
Brian
If you try to drill one of those bolts, drill it slow and don't let the drill bit heat itself up, or allow the metal to get hot which will make it get hard.
The best bet is do it in a drill press with less than 200 RPM.
If you can find a carbide drill bit, (not a cement drill) it will do the job for you.
Brian
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy