Tom Bowman
Member
Wire wheeling the Center Axle Section (Note the Very Important Tool in the background):
Tried JB Weld on a spot weld on the running board - didn't hold, so need to REAL weld:
Almost ready for paint:
Sanded and primed the front wheels today. (No photo.)
Pivot pin/Bushing, Tie Rod/Drag Link Ends, Spindle Bushings, Bearings and Seals, among other things, all ordered.
Cylinder head should be back from the shop this week.
I'm planning to get a few things put back together (like the front end), before taking anything else apart.
Tried JB Weld on a spot weld on the running board - didn't hold, so need to REAL weld:
Almost ready for paint:
Sanded and primed the front wheels today. (No photo.)
Pivot pin/Bushing, Tie Rod/Drag Link Ends, Spindle Bushings, Bearings and Seals, among other things, all ordered.
Cylinder head should be back from the shop this week.
I'm planning to get a few things put back together (like the front end), before taking anything else apart.