Tom Bowman
Member
After removing this cylinder head, now I'm up to a total of...let's see...ONE!
Here are some pictures. I'd appreciate any help in explaining what I'm seeing - crud on top of pistons, etc.
I haven't been burning oil, no smoke, etc.
I've already reached the limit of my abilities, so anything else will need to be done by a pro. (I had already planned to take the head into the shop.)
The good news, if there is any: I didn't see any cracks in the head or block.
Oh, and I almost forgot: it looked like there were two (2) head gaskets. They both stayed stuck to the head, and I haven't removed them yet.
Thanks!
Here are some pictures. I'd appreciate any help in explaining what I'm seeing - crud on top of pistons, etc.
I haven't been burning oil, no smoke, etc.
I've already reached the limit of my abilities, so anything else will need to be done by a pro. (I had already planned to take the head into the shop.)
The good news, if there is any: I didn't see any cracks in the head or block.
Oh, and I almost forgot: it looked like there were two (2) head gaskets. They both stayed stuck to the head, and I haven't removed them yet.
Thanks!