Massey 65 Axle Pivot Bushings

Traktor

New User
I have been working on my Massey 65 that I bought at auction last month. I have replaced a noisey water pump and broken pulley, and changed out the trans/hyd fluid. It is running great.
The round cover, shims and screws were missing from the front axle pivot. It also looks like the bushing is gone. I have located and purchased a used cover plate, screws and shims. My question: Is there also a bushing for the rear that needs to be replaced? I have seen nothing on this anywhere - even the service manual shows just the front.
Is there a rear bushing and where can I get it? I also need a source for the front bushing.
Thanks in advance.
 
look at the top left of this page under MARKETPLACE then go down to TRACTOR PARTS and click on that then follow through they have the bushing.
 
Thanks, Richard. Do you know if there is a rear bushing? Perhaps it is the same size or doesn"t have one. Just need to know so I can order the parts all at once and save some shipping cost.
 
I do not know about the bushing or bushings. Our Fergusons only have one bushing. I am not familiar with the Massey Fergusons. Oh yeah I know what you are saying about shipping cost. Get everything you need at once otherwise the shipping can cost almost as much as the parts. If you order from this site call them and ask they are a great bunch of people there.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top