For Tom in MO. ..TO 20, TSX361 carb, ..completed

GB in MT. · Apr 11, 2013

[b:ecb31e0759][i:ecb31e0759]...AND, headed your way tomorrow morning!!!!
Start, to finish pix, for you, to let ya see what you are getting back.
Here's what we started with....:

After removal of the dead rodent in the choke chamber, and wiring out the passages, it was just a matter of clean-up, and inspection of kit parts...:
Blasted, and kit lay-out...:

SO...here is what you are getting back....:

Give me a call, when you are ready to install this replacement carb, and I will help you, fine-tune it to your engine!!!

Hope this meets with your approval!!!

Gary

[/i:ecb31e0759][/b:ecb31e0759]

Tom Bowman · Apr 11, 2013

Nice work, Gary, as always. (I still don't know how you manage to get all them little bitty parts back inside them carbs! :shock

It'll be some time before I'm ready to put it back on, so I'll be able to display it on the dining room table for a while!

Are you using your new ISP, or the old one?

And finally, did you miss out on this last round of weather?

Thanks again for your work, and for showing it off to the folks on the Fergy board. :wink:

GB in MT. · Apr 11, 2013

[b:6dff3c2178][i:6dff3c2178]
Tom;
Glad ya like what you see!!!
New ISP for the Internet,...and 'Bootlegged Old ISP', for emails!!!! The Old ISP, is still giving us fits for the phone & email release.
Anything to get my blood boiling!!!
They are now saying, anywhere from 5-10 days before release is final!!!

Cheers

Gary :x [/i:6dff3c2178][/b:6dff3c2178]

trac · Apr 11, 2013

That's to clean to work on carbs OH that's not my
shop never mind.

For Tom in MO. ..TO 20, TSX361 carb, ..completed

GB in MT.

Well-known Member

Tom Bowman

Member

GB in MT.

Well-known Member

trac

Member

Similar threads