Author	[Modern View]
Mike Darlington 03-15-2013 19:32:54 24.112.143.243 Report to Moderator	I have included a pic from the Operators Manual. I hope this will clear up my question. I am missing everything between the yoke and plunger. There is no spring, no spacer, nothing there. Just a few remnants of what used to be. As a result the Ferguson System is not functional. Is it safe to use our recently purchased single bottom plow and a disc. Not at the same time, I know that much, J/K. Thoughts? Thanks [Reply]   [No Email]
Jason S. 03-15-2013 22:25:06 174.252.144.111 Report to Moderator	Re: Ferguson System in reply to Mike Darlington, 03-15-2013 19:32:54   You won"t be able to use it like it is currently because every time the plow hit encountered any resistance it would transfer the energy thru the top link to the yoke and draft spring and it would cause the plow to lift which is what it is supposed to do.Since you don"t have the spring the plow would constantly be trying to lift out of the ground because the spring isn"t there to add resistance to the top link forces. If you tried hooking it below the yoke or any other way the tractor will just try to flip over backwards. I wouldn"t try to use it until I got all the pieces installed back on it. Luckily those pieces are quite easy to get. [Reply]  [No Email]