I have been needing to change my front axle pin and bushing
so I ordered one from this site. My axle has the earlier thin
bushing in it. According to this site the 183221M1 is 4 3/4"
long with a 7/8" bolt hole. I got mine in and the bolt hole is
1.00" and the pin is 5.50" long. The bushing is a thin wall
bushing and it has a split in it. When the ends of the bushing
are butted together the inside diameter is still quite a bit bigger
than the pin. The package for the pin says its for a 35X and it
is made by A&I products. Since neither one are any good it"s
time to go to Sparex. I"ve had good luck out of their parts I"ve
used so far. I was sharing this in case anybody was thinking
about buying the same pin from here. It is nothing like the
description.
so I ordered one from this site. My axle has the earlier thin
bushing in it. According to this site the 183221M1 is 4 3/4"
long with a 7/8" bolt hole. I got mine in and the bolt hole is
1.00" and the pin is 5.50" long. The bushing is a thin wall
bushing and it has a split in it. When the ends of the bushing
are butted together the inside diameter is still quite a bit bigger
than the pin. The package for the pin says its for a 35X and it
is made by A&I products. Since neither one are any good it"s
time to go to Sparex. I"ve had good luck out of their parts I"ve
used so far. I was sharing this in case anybody was thinking
about buying the same pin from here. It is nothing like the
description.