TO35 Clutch parts

Inno · Feb 6, 2013

I have found most of the parts I need for my clutch from this site except for one. 182842M1 which is the pressure plate spring also listed as Belleville.......I can't seem to find a replacement in North America, it is listed in a parts book I found in the UK. Now I'm assuming it should be in one piece, mine has a break in it, maybe I'm wrong in assuming it should be one solid piece all the way around. Any ideas?

Jason S. · Feb 6, 2013

Go to depotparts.com. They show one in stock in TN and your local dealer should be able to get it for you.They will not sale to the general public.

Inno · Feb 6, 2013

Don't really have a local dealer, closest one I know of it 100 miles away.
I did find a Sparex catalogue online which does seem to have what I need. I just need to confirm which clutch I have and find a dealer.

samn40 · Feb 6, 2013

The bellville spring should be a complete disc, not broken
anywhere.
Sam

Tony in Mass. · Feb 6, 2013

Hum sounds like a parts yard thing. Maybe when Dave at VT parts reads this- or see if Sam will bring you his extras in a suitcase. He has really strong suitcases....

samn40 · Feb 6, 2013

Sounds like I need to open a parts store or three over there, Tony!!!!!
LOL.....Sam

Tony in Mass. · Feb 6, 2013

Huuummmm.... a Ferguson retail shop, with a showroom full of F40's and bamboo 35's, not a Standard diesel in sight... you Sam at the parts counter, me at the refreshment bar... where we will serve fish and chips with Carling Black Label on tap... am I dreaming??? don't wake me, let me enjoy the moment...

Jason S. · Feb 7, 2013

(quoted from post at 15:09:17 02/06/13) I have found most of the parts I need for my clutch from this site except for one. 182842M1 which is the pressure plate spring also listed as Belleville.......I can't seem to find a replacement in North America, it is listed in a parts book I found in the UK. Now I'm assuming it should be in one piece, mine has a break in it, maybe I'm wrong in assuming it should be one solid piece all the way around. Any ideas?

Do you have a fastener business around you? My local place where I buy a lot of my bolts keeps belleville washers of all sizes in stock, or look at this page and have them shipped to your door if they have the right size....and they should I would think.

http://www.fastenal.com/web/search/product/_/Navigation&refine=~%7Ccategoryl3:%22600090%20Belleville%20Washers%22%7C~

Inno · Feb 7, 2013

We do have a Fastenal here, looks like all the ones they list would be much too small. The one I need is 9-10" in diameter.

Duner Wi · Feb 7, 2013

Maybe here/search provided this
182842M1 SPRING Eberhard Equipment CA 714-957-1111

Jason S. · Feb 8, 2013

What about a 181112M1? It is the belleville spring for a 135 and it shows to be 9"

TO35 Clutch parts

Inno

Well-known Member

Jason S.

Well-known Member

Inno

Well-known Member

samn40

Well-known Member

Tony in Mass.

Well-known Member

samn40

Well-known Member

Tony in Mass.

Well-known Member

Jason S.

Well-known Member

Inno

Well-known Member

Duner Wi

Well-known Member

Jason S.

Well-known Member

Similar threads