Ferguson NKO21 cultivator

gary michales · Feb 3, 2013

This is a NKO21 Ferguson cultivator my neighbor is selling. I believe it is not complete. What is missing and are parts still available? Can someone give me a value? He says make him a offer.

purecty · Feb 3, 2013

i dont see but 4 prongs, i think mine has 6? or naybe mine are too many and too close?
bill

jon corbett · Feb 3, 2013

it depends on how many rows u were cultivating,y dearborn was setup for 3row

Richard L · Feb 3, 2013

I thought they were set up for two rows since they were wide rows back in the day, but I wasn't allowed to do any of the cultivating after the first time I did it. LOL In the condition that is in I believe I would offer $75. Maybe watching some farm auctions you could pick up another partial and make one good one out of two. From what I have seen lately most in complete ready to use condition they seem to be in the $300 range.

gary michales · Feb 3, 2013

Thanks for the info. I just want to turn up some ground for maybe plant pumpkins ect..

chuck41 · Feb 3, 2013

Hi,To be complete, this is what an N-KO 21 had
when new. 2-Tine, outer front 4 intermediate,
2-rear tine, 1-tine,center and 2-front time,inner
for a total of 11 tines. A 22 had total of 6.This
is from my parts book. Also the center fin is
missing. I also don't see the center "pointer"
that bolts on the front axle to guide you. I
don't think it has a lot of value with all this
missing. Chuck

Leroy · Feb 9, 2013

That looks like a single big homemade shovel fastened to 2 of the shanks for use as a furrower and you already have parts from 2 cultivators there as there would have only been 3 of those shanks on there as that is the back row shanks of one used on the center and the other 2 on the far outside shovels. Looks like 2 shanks were used with those oversized shovels to get enough stregnth. Those are the shanks that are usually missing on a cultivator someone has tried to set for 30" rows.

Ferguson NKO21 cultivator

gary michales

Member

purecty

Member

jon corbett

Member

Richard L

Well-known Member

gary michales

Member

chuck41

Member

Leroy

Well-known Member

Similar threads