carburetor

purecty · Jan 30, 2013

any one got a carburetor for a to-20? that they arent using
bill

purecty · Jan 30, 2013

mine had flooded yesterday while we were trying to fix oil line. i had left the gas on and it was dripping out of the carburetor. should i put another one on or can i put a can of something in the gas tank, or just blow it up? or overhaul it or what? lol.
bill

trac · Jan 30, 2013

It sounds like a easy fix now that your hands are dirty from the oil line i make it sound simple right it's not hard to do. Take the carb. off clean it & chances are it's just the float or the needle valve is sticking if worst comes to worst hold the tab that pushes on the needle then pull down on the float just a little bit stopping the fuel from coming in a little sooner when bowl is full. There is measurements that the float should be? but that works for me.

purecty · Jan 30, 2013

ok thanks a lot, but u dont know my luck. nothing goes right for me. lol
bill

carburetor

purecty

Member

purecty

Member

trac

Member

purecty

Member

Similar threads