1959 TO35 Dual Clutch

Inno

Well-known Member
Is there any way of knowing, without taking it apart, which clutch it would have (9" or 11")?

I am going to split it but it would be handy to have all the parts on hand before I start..........I know, life's not like that but..... :D
 
Once again... I curse child labour laws!!!
Can you get a tape in there?... and guestimate? A hand, a flashlight, ruler... that hole is just not big enough for all that at once is it? HEY! find an illegal alien kid! But ya gotta find one that can count too....
 
Even if I could get a tape in there I probably wouldn't trust my measurement. I had probably better split it to be sure because waiting for parts is better than ordering the wrong ones, having to send them back then waiting for parts again.
I am kind of procrastinating on splitting it, never done one before. I have two floor jacks and another one available from a friend, as well as a small bottle jack so I should be ok. Just need to dig out some pieces of 4x4 to make some sort of stand for once it's apart.
 
I'll email u my phone number, I will send you some pics and whatever you need- BUTTTTT... a perfectly clean flat hard surface floor makes this effortless. All these lucky Canadians with their nice warm garages... poor little me....
I wonder... what is the chances if you ordered both sizes of plates.. you will find a use, or another home for the other???
 
Oh eventually I might find a use but odds are I'd order both and the next patient/victim would have something different. The 202 has a single stage clutch so that's not even an option.
Well as I mentioned in your piston direction post, it's -32C here plus wind which brings that down to -42C and I work outside for much of my day job so I DESERVE a heated shop at home. It does have a nice flat, level floor so I should be all set.
Your phone number might be a good idea in case I run into something scary. I have a neighbor who is also curious as to how it comes apart. He doesn't own a tractor.........yet.........but he wants one! He might come down to lend a hand.
Just curious though, would I be able do understand you? Do you talk like other folks I've heard from Mass.? Are you troubled by Norreeeestahs?
 
Yeeeeeeaaaaahhhhhh, I gotta WICKED daaaaaawn eaaast aaaaaaccent. When I'm not talking ancient Finnish that is.
BTW, do you have an 'ATV' lift???? And a helper... or atleast someone to go in the house and call the ambulance is handy to have around. Wooden wedges, short 2x4's, long 2x4's....oh wheel chucks! Or is that a downeast yankee word???
 
No ATV lift but a couple of decent floor jacks and a hyd. bottle jack. Neighbor has another floor jack if necessary.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top