Author	[Modern View]
samn40 01-12-2013 15:46:29 81.154.111.37 Report to Moderator	Yes they do fit as does some David Brown 885, International B250 and Ford 2000/3000 and Dexta wheels. Even some Allis wheels will fit. Sam This post was edited by samn40 at 17:09:42 01/12/13. [Reply]   [No Email]
Eldon (WA) 01-12-2013 16:01:32 98.225.11.231 Report to Moderator	Re: Would the rear hubs from a TO 30 fit a MF 35? in reply to samn40, 01-12-2013 15:46:29   Hmmmmm, I've got about 85 Allis's sitting here and none of them are close....the small ones are 6 lug and the large are 6" hubs with 8" BC. [Reply]  [No Email]
Tony in Mass. 01-12-2013 17:36:39 76.127.225.182 Report to Moderator	Re: Would the rear hubs from a TO 30 fit a MF 35? in reply to Eldon (WA), 01-12-2013 16:01:32   That must be one of those Irish D 14's. They have some sort of metric bolt pattern over there, and with enough Guiness and a big enough hammer, AC wheels will fit on a fergie. Notice the exhaust pipe? Must be another !@#$% diesel..... [Reply]  [No Email]
samn40 01-13-2013 15:17:16 217.43.59.224 Report to Moderator	Re: Would the rear hubs from a TO 30 fit a MF 35? in reply to Tony in Mass., 01-12-2013 17:36:39   It is an Allis ED40, completely Allis Chalmers except for the STANDARD 23C engine! Sam [Reply]  [No Email]
Eldon (WA) 01-12-2013 17:41:04 98.225.11.231 Report to Moderator	Re: Would the rear hubs from a TO 30 fit a MF 35? in reply to Tony in Mass., 01-12-2013 17:36:39   Quoting Removed, click Modern View to see I think you're right....technically not much Allis content there.... [Reply]  [No Email]