Author	[Modern View]
Dan S (NY) 12-11-2012 09:23:44 216.27.112.8 Report to Moderator	Tony, what happened to those control lever fingers?? Looks like the position control lever is broken off and things are a bit bent. Dan [Reply]   [No Email]
Tony in Mass. 12-11-2012 09:59:07 76.127.225.182 Report to Moderator	Re: ferguson TEA20 question in reply to Dan S (NY), 12-11-2012 09:23:44   Good question Dan, I suppose that is how I ended up with it for my price. The cover was broken in half, a ton of nickel rod was built up on there, it must have took someone days to do this, but the lifting pressure was not there, so I got in there and got it to function like an earlier model. Had to get it rolling when these pics were taken, so it does its simple 3 point job for now. Not now- 202 in the works, but later this winter or early spring we'll take the top off again and see what we can do- a piece of lever is broken off, the cams look way off, and I wonder if his welding threw off the position controls- I was told it just pulled wagons on a tobacco farm for many years, we can see why. I was thinking a donor would show up and I would just replace this butchered cover... trouble is... I don't part out the donors, I end up fixin' 'em! Next big job will be getting Lyle addicted to these things.... [Reply]  [No Email]
Dan S (NY) 12-12-2012 06:15:57 216.27.112.8 Report to Moderator	Re: ferguson TEA20 question in reply to Tony in Mass., 12-11-2012 09:59:07   That must have been some catastrophic failure to break everything like that. ...and who could get addicted to these things anyway, I can stop any time I want... Dan [Reply]  [No Email]