Tony in Mass.
Well-known Member
OK, the last time I hooked this thing up, it took nearly 3 days. I got it whittled down to 2 hours. but obviously on this tractor- the F 40, the bars to the stabilizers are way off.
I see one bracket- might be other way round, but still inches off where it fit on the 135. Could it be the 40 has longer lower links?
By some quirk of fate, it is able to raise and lower like it should. Just that everything else is wrong.
The manuals pdf's on the N tractor board said 'with practice, this mower can be mounted in 5 minutes'.... I realy don't want to practice doing this that often. It might just live with this F40 forever...
OK, it started to snow again, it was getting dark, and my feet were getting cold. But tomorrow I'd like to finish hitching it up properly, if such a thing is possible....
I see one bracket- might be other way round, but still inches off where it fit on the 135. Could it be the 40 has longer lower links?
By some quirk of fate, it is able to raise and lower like it should. Just that everything else is wrong.
The manuals pdf's on the N tractor board said 'with practice, this mower can be mounted in 5 minutes'.... I realy don't want to practice doing this that often. It might just live with this F40 forever...
OK, it started to snow again, it was getting dark, and my feet were getting cold. But tomorrow I'd like to finish hitching it up properly, if such a thing is possible....