|
| |
| Harry Ferguson Tractors Discussion Forum |
Topic: Re: workin on a to35
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| John(UK)
11-28-2012 06:49:14
79.76.254.99
|
If you mean the top casting under the seat, you can't just weld it(unless you know what you are doing) as it has to withstand a lot of pressure. You can replace the top casting new ones are available and they are strengthened for the later tractors. What will most likely have happened is that someone has used a higher pressure safety Valve on the older top cover and it can't withstand the extra pressure. Make sure that the bolts attaching the cover to the tractor are torqued correctly or it will do it again. All the controls and linkage inside will need to be changed onto the new cover and re-set. The Top Cover isn't listed on this site that I could see, but it is Sparex part S42293 (MF Part 180908M1) which will be available from any Sparex parts dealer, you should also fit a new Safety Valve in case it is this that has stuck and caused the problem
If you want the information about doing this, let me know and I will send it..John(UK)..fergusontractors@hotmail.com
|
|
|
| [Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
