|
| |
| Harry Ferguson Tractors Discussion Forum |
Topic: OEM ???
[Return to Forum]
| Author |
[Modern View]
|
| s19438
11-05-2012 12:47:50
173.62.167.161
|
  it has HF and TO part number on it.
|
|
|
| miner09
11-05-2012 16:27:20
75.230.106.20
|
|
Re: OEM ??? in reply to s19438, 11-05-2012 12:47:50
|
|
| The last two F-40 I rebuilt had this type bowl with the HF on them.I like the original parts.(building propane now)The short tube is for reserve. Turn valve on one 1/2 turns, when the tractor runs out of gas you turn valve all the way open and you don't have to walk to the house. LOL
|
|
|
| 2tractors
11-05-2012 16:16:40
207.144.5.133
|
|
Re: OEM ??? in reply to s19438, 11-05-2012 12:47:50
|
|
| When I replaced mine with the ball valve I soldered in one tube into the brass fitting and soldered the screen around it. Those bowl types will cross thread if you look at em wrong.
|
|
|
| Inno
11-05-2012 14:26:52
206.47.249.246
|
|
Re: OEM ??? in reply to s19438, 11-05-2012 12:47:50
|
|
| Quoting Removed, click Modern View to see
The last ones I bought didn't have the shorter tube but did have a screen around the outlet with the taller tube sticking up above it. So far they have worked out ok, catching the odd piece of junk, I've had to take the one out of the 202 a couple of times but that's because the previous owner tried to seal the tank but for some reason the por 15 (or whatever he used) is flaking off. Probably not clean enough when he sealed it.
|
|
|
| maxwell99
11-05-2012 13:03:41
208.66.244.245
|
|
Re: OEM ??? in reply to s19438, 11-05-2012 12:47:50
|
|
| | looks good, the replacements cutoff valves i have bought lately, do not have the short standing pipe i just take a short piece of copper tube, grind it down so it will fit tight into the fuel opening. so far it works fine and keeps the fuel inlet out of the bad stuff. if the guys building these new fuel cutoff valves had to use them on their old tractors, they would be sure they had the short tube inlet extensions in place.
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
