|
| |
| Harry Ferguson Tractors Discussion Forum |
Topic: Re: Same TE 20 New Problem
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| Jerry/MT
10-27-2012 18:42:18
206.183.116.145
|
Is the thermostat stuck closed? It"s supposwed to be in the upper rad hose. Have you removed the goosneck from the head and seen if the head outlet or the head itself is plugged? |
|
[Reply] [No Email] | |
| DON TX
10-28-2012 10:45:06
76.196.0.42
|
|
Re: Same TE 20 New Problem in reply to Jerry/MT, 10-27-2012 18:42:18
|
| Reread my 1st post. I removed the tstat to find no circulation. The head is plugged. I have the goose neck removed and filled the head. The liquid is sitting to the rim of the head. It does not flow down to the water pump. Is there anything I can use to clean the head without removing it? DON TX |
[Reply] [No Email] | |
| Jerry/MT
10-28-2012 12:40:40
206.183.116.145
|
|
Re: Same TE 20 New Problem in reply to DON TX, 10-28-2012 10:45:06
|
| What"s plugging the head? Is it lime deposits? If so, I wonder if taking it to a machine shop and having it hot tanked will clean it up? Are you sure it"s just the head? |
[Reply] [No Email] | |
| DON TX
10-28-2012 13:09:37
76.196.0.42
|
|
Re: Same TE 20 New Problem in reply to Jerry/MT, 10-28-2012 12:40:40
|
| | I assume it's rust. Could be anything. The system has been closed so don't suspect mice or other critters. When I drained it to remove the radiator the water was very rusty. With the w/p removed the block drains thru the opening created and the block drain works. As I said, I'm trying to do this w/o removing the head. I don't want to get into the valve train. It'll have to be removed to tank it. Don't want to open a can of worms unless it's necessary. DON TX |
[Reply] [No Email] | |
| Jason S.
10-29-2012 06:11:20
204.54.36.245
|
|
Re: Same TE 20 New Problem in reply to DON TX, 10-28-2012 13:09:37
|
| Have you tried blowing air thru the passages? I know it will make a mess and blow water and rust all over you but it doesnt sound like you have too many options left besides removing the head. |
[Reply] [No Email] | |
| Jerry/MT
10-28-2012 19:25:46
206.183.116.145
|
|
Re: Same TE 20 New Problem in reply to DON TX, 10-28-2012 13:09:37
|
| | You may not have a choice if it"s that blocked up. There"s not a lot of skinny passages in the head that I recall so I can"t imagine it"s just rust. Maybe someone put muddy water in there in an emergency. I"d try a good radiator flush(Prestone Flush?). Any way you can hook a hose fitting to the block drain and back flush it? |
[Reply] [No Email] | |
[Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|