|
| |
| Harry Ferguson Tractors Discussion Forum |
Topic: Re: TO 35 Governor
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| John(UK)
09-20-2012 04:36:30
79.76.253.110
|
The governor will never work unless the compensating spring and link is fitted. Both springs must be in good condition and not stretched or rusted or they will be weak, same applies to the one on the vertical rod, they are available. Governor will not operate correctly if there is anything wrong with the springs.
This could be part of the cause of sluggish operation, but the usual error is the Bumper Spring has been adjusted incorrectly and too much pressure has been applied.I have the dimensions of the Compensating link and the information about how to adjust the Governor correctly. Because the Governor is not operating correctly, never presume that it is the Governor, it is almost always adjustment of the linkage, no matter what tractor model you have.
When you took off the Timing Cover did you replace the oil seal and gasket as they often leak when they have been disturbed. If you need the setting information for the Governor and the compensating spring link, email me direct and I will send it to you....John(UK)...fergusontractors@hotmail.com
|
|
|
| [Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
