cylinder head leak

Anonymous-0 · Sep 17, 2012

My to20 has a coolant leak in the cylinder head. the leak is around the outside were the tubes that the push rods go thru. these tubes dont look cast.they look pressed in. I was wondering ifthey were a cast part of the head or if they were a tube that is pressed in and may be a place that may leak. thenk you , Greg

NWBuckeye · Sep 17, 2012

No big deal to replace with a press.

Anonymous-0 · Sep 18, 2012

I have a good used head if yours is bad. Jim --No-Advertising-in-Forums

2tractors · Sep 18, 2012

I have a to20 head that has a crack under the valve spring. If it's not possible to order the tubes then I'll sell you mine for $50 plus shipping.

John(UK) · Sep 18, 2012

The tubes are pressed in and then flared with a tool to clamp them into the head. But I don't think that they will cause water to leak if they are damaged, I think that you will need to look more closely at that, it is possibly a cracked Head that is causing your problem..John(UK)

cylinder head leak

Anonymous-0

Well-known Member

NWBuckeye

Member

Anonymous-0

Well-known Member

2tractors

Well-known Member

John(UK)

Member

Similar threads