point adjustment screw

Dale Rowsey · Sep 16, 2012

I was trying to adjust the points on a TO20 and broke the point adjustment screw any way to fix this or just make sure that the tighting screw is tight enough to hold the points

miner09 · Sep 16, 2012

Can you remove old screw and replace with new screw or from a salvage tractor?

Bruce(OR) · Sep 16, 2012

There was a dist on fleabay a short while ago. . .
Me? If forced to, would look at drilling it out and stuffing in a new fatter screw if stripped.
.

Jerry/MT · Sep 16, 2012

Try to find an auto electric shop and get the correct Delco screw. I"ll bet NAPA has them also.

phil(va) · Sep 17, 2012

I'm with Jerry. Just go to an auto electrical repair shop and ask for a screw out of a discarded Delco distributor. I bet most have one that will fit somewhere out in the shed or junk pile.

point adjustment screw

Dale Rowsey

New User

miner09

Well-known Member

Bruce(OR)

Well-known Member

Jerry/MT

Well-known Member

phil(va)

Well-known Member

Similar threads