Dale Rowsey

New User
I am looking for the wire between the coil and the distributor, any place I can find one, looks to be about 6 inches long,it will fit a TO20.

Thanks Dsle
 
Make one.

18 AWG or so with crimped terminal ends. Or just a wrapped around the posts. Does not need to be anything factory spacific.

Jeff
 
Well yes, there is that one too.

As Bob said, an auto part stor for the heavy HT wire. Though I am not sure thoes are sold independantly may have to get a whole spark plug wire set.
 
Just buy a roll of 16 or 18 gauge wire and some crimp on ends. Cut it to the right length and crimp a ring terminal on each end. I don't imagine you'll find a "factory original" piece of wire like that if that's what you're looking for.
 
He's not looking for the high voltage lead, it's the one from the points to the coil.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top