|
| |
| Harry Ferguson Tractors Discussion Forum |
Topic: coil wire
[Return to Forum]
| Author |
[Modern View]
|
| Dale Rowsey
09-17-2012 06:46:05
75.243.43.208
|
I am looking for the wire between the coil and the distributor, any place I can find one, looks to be about 6 inches long,it will fit a TO20.Thanks Dsle
|
|
|
| Inno
09-19-2012 13:20:09
206.172.0.204
|
|
Re: coil wire in reply to Dale Rowsey, 09-17-2012 06:46:05
|
|
| He's not looking for the high voltage lead, it's the one from the points to the coil.
|
|
|
| Charles in Aus.
09-17-2012 21:57:22
211.30.56.106
|
|
Re: coil wire in reply to Dale Rowsey, 09-17-2012 06:46:05
|
|
| Don't be mislead by salesmen and use carbon fibre cored HT lead . Copper wire core only .
|
|
|
| Inno
09-17-2012 19:12:14
65.95.123.154
|
|
Re: coil wire in reply to Dale Rowsey, 09-17-2012 06:46:05
|
|
| Duplicate
This post was edited by Inno at 19:13:18 09/17/12.
|
|
|
| Inno
09-17-2012 19:11:00
65.95.123.154
|
|
Re: coil wire in reply to Dale Rowsey, 09-17-2012 06:46:05
|
|
| Just buy a roll of 16 or 18 gauge wire and some crimp on ends. Cut it to the right length and crimp a ring terminal on each end. I don't imagine you'll find a "factory original" piece of wire like that if that's what you're looking for.
|
|
|
| Dale Rowsey
09-17-2012 16:03:05
75.192.96.162
|
|
Re: coil wire in reply to Dale Rowsey, 09-17-2012 06:46:05
|
|
| This is not the one that goes to the dist. cap but to the side wire that goes to the points
|
|
|
| Bob (Aust)
09-17-2012 12:27:17
60.231.57.66
|
|
Re: coil wire in reply to Dale Rowsey, 09-17-2012 06:46:05
|
|
| I think he is looking for the HT lead. They are available from any vehicle parts supplier.
|
|
|
| Jeff-oh
09-17-2012 15:31:46
69.174.58.132
|
|
Re: coil wire in reply to Bob (Aust), 09-17-2012 12:27:17
|
|
| | Well yes, there is that one too. As Bob said, an auto part stor for the heavy HT wire. Though I am not sure thoes are sold independantly may have to get a whole spark plug wire set.
|
|
|
| JEff-oh
09-17-2012 06:52:10
69.174.58.132
|
|
Re: coil wire in reply to Dale Rowsey, 09-17-2012 06:46:05
|
|
| | Make one. 18 AWG or so with crimped terminal ends. Or just a wrapped around the posts. Does not need to be anything factory spacific. Jeff
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
