F20 Cultivator Model

WOK

Member
Can someone tell me model of cultivator I have for a F20. It is a 2-row with a PTO driven power lift. The front pull bar is angle iron (not square or round as some were). The ganges appear like the ones on a F12 picture in the Spring 2015 HARVESTER HIGHIGHTS, page 28. I'v no F20 & it's been stored inside for 40 yrs., that I know of. What might it be worth? I just can't junk it yet. Thanks -- WOK
 
221G maybe , I think that is what I have and sounds the same . Have a cultivator parts book somewhere I could post some pics if I get a chance.
 
Could you post some information and maybe some pictures of the PTO Power Lift? I have a lot of interest in this feature as My Dad started in 1944 building a home made one for a "Regular" which involved 2- Model T Ford Differential's and a Brake & Cable pulley on the right side for a loader and post hole augar and a Mechanical Lift on the left side for lift arms & Cable lift& ect. for implements It apparently was successful at the time. I am trying to recall how they actually worked since "Car Buff Brother" tore it all apart and discarded most of the parts. I thought my Dad (years ago)mentioned that the Car Differential provided the live type clutch.
We thought he may have invented it but it seems there was already information available from Ag colleges and publications that a "Young Farmer" who grew up with horses and at the start of the Mechanical age could obtain for starting information. Did IH Farmall offer the feature? cleddy
 
robgIN-- Thanks for the model information. Would you photo copy the parts book? I'll remberse you and e-mail me and I'll get you my address. I believe I've all mounting part, outbut there is one I can't figure out. Thanks
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top