Crackerjack
Member
My father and I have been working on the last sections of 'Project H', but we've encountered some issues along the way.
1. The leaver to engage the pulley seems to be jammed and won't budge, the pulley turned freely by hand, what would the methods be to correct this ?
2. We replaced the manifold but when putting the exhaust pipe back ontop of the manifold we found large gaps, we thought we forgot to order a gasket but when we looked through the Steiner catalog there was no such thing. Is there such a thing ? If not what do people usually do to resolve this issue ?
3. Even though it's winter (Australia) the temperature won't budge on the gauge, I've tested the gauge out with hot water and it works fine, the shutters are closed, we've even put chaff bags infront with no success of raising the temp.
Thanks.
1. The leaver to engage the pulley seems to be jammed and won't budge, the pulley turned freely by hand, what would the methods be to correct this ?
2. We replaced the manifold but when putting the exhaust pipe back ontop of the manifold we found large gaps, we thought we forgot to order a gasket but when we looked through the Steiner catalog there was no such thing. Is there such a thing ? If not what do people usually do to resolve this issue ?
3. Even though it's winter (Australia) the temperature won't budge on the gauge, I've tested the gauge out with hot water and it works fine, the shutters are closed, we've even put chaff bags infront with no success of raising the temp.
Thanks.