48 Super A Wiring diagram needed

JRSutton

Well-known Member
Been searching the web but can't seem to find anything that works for me.

I have a manual, but it's not very clear.

I have a four position swith - it's 6 volt - magneto - generator with voltage regulator.

I know the magneto is simple - one ground wire to the kill switch.

Other than that I'm just not confident enough with to start wiring.

Any help would be appreciated.

thanks
 
This is close enough. The Super A uses a separate fuse holder in the panel rather than on the back of the switch. So the hot feed to the switch has to go via the fuse holder. Use the diagram in your manual for wire routing.

http://www.atis.net/CubFAQ/cub_faq_2.html#q3

cubwire.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top