Drawbar stud source? Super A

Claven2 · Aug 23, 2015

I'm looking for 2 ea. of 69499D Stud, Drawbar 2-1/2" and the nuts (69500D) that g with them.

Is any place selling these for reasonable money?

Tom Fleming · Aug 23, 2015

http://burchstoretractors.com/produ...ll-140-130-super-a-100-tractors-free-shipping

Not sure what your definition of "reasonable" is. Also, Fastenal sells different studs. Because that has what appears to be a fairly different thread configuration, standard studs may not be available. If that is the case, you need to "pay the piper"........

Claven2 · Aug 23, 2015

(quoted from post at 22:06:33 08/23/15) http://burchstoretractors.com/produ...ll-140-130-super-a-100-tractors-free-shipping

Not sure what your definition of "reasonable" is. Also, Fastenal sells different studs. Because that has what appears to be a fairly different thread configuration, standard studs may not be available. If that is the case, you need to "pay the piper"........

that would be reasonable if:

1) they were not sold out; and
2) if they had the nuts too.

Tom Fleming · Aug 23, 2015

I absolutely would give Fastenal a call tomorrow or search their website tonight. They may have the config. All you will need to know is diameter, length, and thread pitch (on each end). Grainger also may have something. McMaster Carr is also another potential source.

Lastly, you could also give Burchstore a call and see when they will have new stock. Joe's Farmalls may also be a source.

kub6040 · Aug 23, 2015

I am listed in the classified no picture ads super a parts
I have them call the phone number and I will get you what
you need.

Super A · Aug 25, 2015

CaseIH will have them. Not sure on cost but they will be correct.

Al

Claven2 · Aug 25, 2015

I found a used set (mail order)

Drawbar stud source? Super A

Claven2

Member

Tom Fleming

Well-known Member

Claven2

Member

Tom Fleming

Well-known Member

kub6040

Well-known Member

Super A

Member

Claven2

Member

Similar threads