where to find the connector parts for super hydraulic arm?

Claven2

Member
My super A only has 2 of the 3 quick-release assemblies on the ends of the hydraulic rockshaft arms that raise/lower the implements.

I'm talking about the little oval plate that is spring loaded and retains a could pins so you can quickly connect implement drive arms.

Anyone know if there is a place to get these as spare parts? I'd like to have the third set.
 
Here' the CIH numbers. AFAIK ,all the parts are still available thought the dealer, or plug the part numbers into GOOGLE for on-line sources.

Pin that goes through spring # 439-1426
Spring # 3501444R1
Cotter key# 350142R1
Bar # 350188R2
 

Got it all ordered new :) I had the parts manual, but never figured on searching by part numbers - I'd assumed it was all no longer sold. WRONG.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top